Two black surface options
Choose high-abrasion vinyl film (VBK) or fabric coating (FBK), according to wear pattern, contact conditions and scanner maintenance requirements.
Rendering based on product referenceRADBAR / CURTAINS
BaseShield, ProShield and UltraShield curtain materials for baggage, parcel and cargo screening. Specify the surface, weight, hanging geometry and scanner operating conditions together.
Lead-free materialWear-resistant surfacesOEM setsSource: manufacturer product literature linked above. Confirm current model, test conditions and supply specification for your order.
BaseShield, ProShield and UltraShield are three lead-free curtain families for security scanners. The choice combines tube-voltage range, hanging weight and surface construction, with OEM cutting and printing options.
Choose high-abrasion vinyl film (VBK) or fabric coating (FBK), according to wear pattern, contact conditions and scanner maintenance requirements.
Lower hanging mass can assist passage, but return motion and overlap remain important. The brochure reports over five million bag passes; confirm the test load and acceptance criteria before specifying durability.
Available as large rolls, pre-cut complete sets or individual strips, with custom printing. Listed maximum width is 1200 mm and temperature range is −40 to 70 °C.
Transcribed from manufacturer literature, with source references and conditions kept alongside each table.
| Series | Listed tube voltage | Weight at 0.35 mmPb (kg/m²) | Catalog positioning |
|---|---|---|---|
| BaseShield | ≤160 kV | 7–8 | Cost-effective |
| ProShield | ≤120 kV | 6.3–6.6 | General-purpose |
| UltraShield | ≤160 kV | 4.3–4.5 | Lightweight |
Voltage-to-series mapping follows the original table columns. Common listed grades: 0.35 / 0.5 / 0.6 / 1.0 mmPb; customization range: 0.125–2.0 mmPb. Confirm the selected formulation and test conditions.
Source: Lead-Free X-Ray Curtains for Security, page 2The brochure lists ProShield at ≤120 kV and BaseShield and UltraShield at ≤160 kV. These are series-specific entries, not an interchangeable rating for every curtain construction.
No. Balance hanging mass with the required shielding, strip geometry, wear and return behavior, then test the installed assembly under representative scanning conditions.
Manufacturer literature · referenced pages 1–2
Selection notes explain the literature and do not replace model-specific instructions, test reports or project design.
LET’S ENGINEER WHAT’S NEXT
Share your equipment, radiation conditions and design constraints. Start with a material decision grounded in evidence.